> > i searched everywhere on it,i can't find the brand of the monitor.
> You are telling me that there are ZERO numbers of any kind printed on the chassis,
> PCB, or otherwise?
> You can't take photograph of it?
> You can't describe any portion if it? (Size, coloring, the way it mounts, does it
> have a satellite board, etc)
> > you can look around
> > the net and see if they mount a precise brand on all virtua striker 2 cabinets.
> Not how it works, and not my job. If it was as simple as a google why haven't you
> done it?
> > the
> > question was this anyway:the monitor works fine with its jamma game.the problem
> > when i connect it to the pc.i'm using an ati radeon x100,and 6.5 catalyst drivers.i
> > connect the whole jamma to the j-pac,set the jumper to15 hz,(the monitor is dual
> > frequency,but a lot of peopole suggested me to set it that way),installed soft
> > 15hz,and set install the 15hz mode (from soft15khz).now,when i turn it on,half of
> > times i see that black line\box running through the screen.so as you can see from
> > video,the only "good" part i can see,its only the upper part of the desktop.then
> > there's the lower part but its a glowing neon color...
> Does the monitor automatically adjust frequency, or is there a jumper to set
> manually? What two frequencies does it handle? 15Khz anf 24Khz? 15Khz and 37Khz?
> 24Khz and 37Khz?
> > In those rare occasions that this black line doesn't show up,i can see just a
> > blurring,but movingthe hfreq knob on the monitor controllers,solve this issue.the
> > other issue though is that the screen is enormous,no matter whichresolution i
> > from display settings,or from MAME itself.if you look in my youtube channel,i
> > a video of gauntlet in attract mode,and you'll see there that the letters and stuff
> > are gigantic,no matter what options i tinker within mame(aspect
> > ratio,resolution,triple buffering etc)the screen will always be that big.hope its
> > clearer now
> I'm not digging through your youtube videos for a specific one. Honestly Youtube
> videos are just about useless. Please take pictures and post them if you need help
> with a specific issue.
a little uptight ,aren't we?what did i wrote to make you so angry...anyway i can post photos of the monitor from the back,under the board,over the board etc,let's see if you find anything,becaue maybe i'm blind at this point.
point 2:the monitor is double frequency,but i don't have a manual for it so i don't know which frequencies it supports.i've been told by other people to check the jumper in the back of the monitor like you did,problem is that i can't find any,and personally i' m scared to touch anything that's on the back of the monitor,so i have to take a torchlight and see where it could be .usually they used to write the model or the brand of it in the power supply,like
in my hantarex polo,but this is completely anonimous.
point 3 :i have like 4 or 5 videos,that lasts 30 secnod at worst,but i'll take a picture of it,although it will be hard to understand what's happening exactly