> Hi Guys, > > So I have my cab pretty much completed, Just wanting to find the best way to give > some nice backlighting behind the glass. > > I have left a gap at the bottom and the top of the Perspex (yes, it was easier and > less breaky then glass) and My intention was to have some sort of blue ligthing from > behind. > > I bought a set of christmas rope lights, but they got too hot > > I also tried some usb powered blue cord from ebay , but its pretty much just the cord > that glows, I need bigger. > > What would you guys suggest? > > I've put a few pics to give you an idea.
I'd find the lights distracting imo. Anyway, if you have ofcuts of plexi or perspex, you can make a glowing strip and glue it in or something.
What I would do is get a peice of clear plastic and drill say 5mm holes at about 7-10cm. Glue some blue leds into them and wire up all the cathodes and the anodes to each other in parallel and attach a resistor to the anode line and hook up a 5v source. What's good is because of the way light works and the way the light travels through the plastic, it should give you a nice even glow.
[ATTACHED IMAGE]
----
On a quest for Digital 573 and Dancing Stage EuroMix 2
By gods I've found it!
|