|
Looking for a control panel overlay for an electrocoin xenon
#268631 - 11/15/11 03:37 PM
|
|
|
Hello,
I've an Electrocoin Xenon (My exact cab can be seen here - http://www.podrasoft.com/arcade/cab.htm) that is missing any kind of CPO. I'm finally getting round to replacing the buttons and figured I should do the CPO at the same time.
I'm still not sure what design I should go for but wondered if anyone here knows if the original designs for the Xenons CP exist anywhere? I've had a look online and haven't managed to find anything so far. Are there any designs you think would go well with the colour scheme of the Xenon? (I love SF2T and have a SF2 Marquee but I think the Grey, yellow and purple of the CPO would clash horribly with the mostly black cab )
Or perhaps you've got experience of replacing the CPO on a Xenon (or one of the other Electocoin's that share the same panel). Was there anything you came across that complicated things? Do you have specific CPO dimensions that work really well or an example CPO file I could look at to build my own template if needed to send to http://www.gameongrafix.com/ ? Lastly, the Control panel is a kind of bobbled metal (you can just make this out in the link at the top of the post). I assume this is normal for this panel type? Will the CPO go over the top without adjustment or is this unusual and would you recommend some process of smoothing?
Cheers for any info/help you can provide.
Paul
|
|
|
italie |
MAME owes italie many thank yous, hah
|
|
|
Reged: 09/20/03
|
Posts: 15243
|
Loc: BoomTown
|
|
Send PM
|
|
|
Re: Looking for a control panel overlay for an electrocoin xenon
[Re: Pod]
#268669 - 11/16/11 12:22 AM Attachment: 222007401.jpg 392 KB (2 downloads)
|
|
|
Metal looks normal to me, but if you want to smooth it out just take a soft dremmel stone to it.
Only CP overlay image I could find.
> Hello, > > I've an Electrocoin Xenon (My exact cab can be seen here - > http://www.podrasoft.com/arcade/cab.htm) that is missing any kind of CPO. I'm finally > getting round to replacing the buttons and figured I should do the CPO at the same > time. > > I'm still not sure what design I should go for but wondered if anyone here knows if > the original designs for the Xenons CP exist anywhere? I've had a look online and > haven't managed to find anything so far. Are there any designs you think would go > well with the colour scheme of the Xenon? (I love SF2T and have a SF2 Marquee but I > think the Grey, yellow and purple of the CPO would clash horribly with the mostly > black cab ) > > Or perhaps you've got experience of replacing the CPO on a Xenon (or one of the other > Electocoin's that share the same panel). Was there anything you came across that > complicated things? Do you have specific CPO dimensions that work really well or an > example CPO file I could look at to build my own template if needed to send to > http://www.gameongrafix.com/ ? Lastly, the Control panel is a kind of bobbled metal > (you can just make this out in the link at the top of the post). I assume this is > normal for this panel type? Will the CPO go over the top without adjustment or is > this unusual and would you recommend some process of smoothing? > > Cheers for any info/help you can provide. > > Paul
[ATTACHED IMAGE - CLICK FOR FULL SIZE]
|
|
|
|
Re: Looking for a control panel overlay for an electrocoin xenon
[Re: italie]
#268724 - 11/16/11 12:47 PM
|
|
|
Yeah. That's the best I've found too
|
|
|