MAMEWorld >> Hardware
View all threads Index   Flat Mode Flat  

MAME owes italie many thank yous, hah
Reged: 09/20/03
Posts: 15232
Loc: BoomTown
Send PM
Re: No picture on CRT
01/30/11 05:38 PM

> I hope I have put this in the right forum. I am also a bit of a MAME novice so if I
> sound a bit thick sorry!
> I have a MAME cabinet with a CRT monitor, I have moved it from upstairs to downstairs
> and now it all powers up but the monitor isn't showing any of the MAME stuff. It
> turns on but its obviously not connected to the PC anymore.
> There was a red wire that had come loose from a jumble of solder between the scart
> cable coming out of the CRT monitor which I did solder back on but I'm not sure
> whether its gone back where it went on to be honest.
> Does anyone know whether this could be causing the problem and where I can find a
> wiring diagram so I can resolder it all back together? Also is it possible to connect
> all the wires using connector blocks so I don't have this problem again?
> Thanks

Going to need as many model numbers as possible. PC, CRT, and anything else you can find. Also, pictures are worth 1000 words as well. Get shots of the connector you soldered, and any other PC to monitor links..

Entire thread
Subject Posted by Posted on
* No picture on CRT sarahwilson 01/30/11 04:54 PM
. * Re: No picture on CRT italieAdministrator  01/30/11 05:38 PM

Extra information Permissions
Moderator:  GatKong 
0 registered and 4 anonymous users are browsing this forum.
You cannot start new topics
You cannot reply to topics
HTML is enabled
UBBCode is enabled
Thread views: 2395